BMT - Takasago Electric, Inc.

Produkte

Ventile

Mediengetrennte
Magnetventile

Mediengetrennte
Proportionalventile

Quetschventile

Miniatur
Magnetventile

Proportionalventile

Magnetventile

Mediengetrennte
Pneumatikventile

Pneumatische
Schrägsitzventile

Luft- und Raumfahrt
Ventile

Ventiloptionen &
Zubehör

Bistabile
Magnetventile

Position-Feed-Back
Shaft

Soft-Seal

Ventiduct Option

Zero-Internal Volume
Valve

Zero-Pumping Volume
Valve

Pumpen

Manifolds & Chips

Sensoren

Schnellkupplungen, Fittinge & Schläuche

Entwicklungen

Mass-Flow-Controller

Labor Equipment

Microfluidic

Kataloge

Takasago Electric, Inc. - Ventiloptionen

Unsere OEM-Produkte werden nach den spezifischen Wünschen unserer Kunden angefertigt. Aus diesem Grund können wir Ihnen hier nur einen geringen Einblick in unsere Produktpalette bieten. Bitte nehmen Sie mit uns Kontakt auf, damit wir Ihnen auf Ihre Bedürfnisse angepasste Produkte anbieten können.

		Bistabile Magnetventile The attractive force between the pole piece and plunger by which a valve's operation is produced varies according to three factors: 1. The distance between the pole piece and the plunger (the valve's stroke) 2. The magnetic force of the coil 3. The magnetic force of the permanent magnet.


		Position-Feed-Back Shaft The Position-Feed-Back Shaft, projected at the top of the valve, moves up and down as the valve opens and closes. The shaft can transmit the motion of the valve to a microswitch for sending a reliable feedback signal of the on-off status to the control system.


		Soft-Seal The Soft-Seal is a useful option for systems which handle easy-crystallising or particle-contaminatable fluids. Small elastic parts, which are as chemically inert as TeflonTM, protect sealing surfaces from particles in the fluids, reducing leakage problems which were common with TeflonTM valves.


		Ventiduct Option Takasago's VENTIDUCT is an optional part which is fitted between a valve body and the solenoid. It has ducts for ventilation and heat radiation. It is used as follows. With volatile and corrosive fluids With fluids which are temperature sensitive By users of high temperature fluids


		Zero-Internal Volume Valve The "internal-volume" is the space between the diaphragm and the body. When the valve closes, this volume is trapped, often reducing the sensitivity of a test instrument. In the old design, the protruding valve seat is hard and prevents the TeflonTM diaphragm from flattening against the valve body.


		Zero-Pumping Volume Valve The diaphragm produces a pumping effect on a fluid as the valve opens and closes. This is because the up-and-down movement of the diaphragm increases and decreases a volume inside the valve chamber as the valve acts. The volume of a fluid put in and out is called a pumping volume.