Unsere OEM-Produkte werden nach den spezifischen Wünschen unserer Kunden angefertigt. Aus diesem Grund
können wir Ihnen hier nur einen geringen Einblick in unsere Produktpalette bieten. Bitte nehmen Sie mit uns Kontakt
auf, damit wir Ihnen auf Ihre Bedürfnisse angepasste Produkte anbieten können.
 | |
2 Position - N/O Poppet Type
WHAT IS IT? This is a 2-position, three-way, poppet type Solenoid Valve. It is compatible with all petro-chemical fuels and hydraulic fluids and, with suitable elastomer material, can be compatible with the synthetic oils. The design permits the Valve to be completely submerged in the working fluid. This allows for installation deep within a fuel or hydraulic manifold occupying what otherwise may have been wasted space and giving a "clean" look to the package. The "pig-tail" leads can be replaced by a connector if required. All ferro-magnetic surfaces are Electroless Nickel plated for corrosion prevention. The Coil is the "Bifilar" Type which provides for radio frequency noise suppression.
|
| | | |
| | | |
 | |
2 Position, 2 Coil
WHAT IS IT? This is a two position, three way normally closed solenoid valve rated for 4000 psi. It uses metal-to-metal dual poppet and seat design with a maximum leakage of 20 cc/min. The solenoid assembly contains two redundant coils, providing full operating capability with either coil.
This design is configured as a cartridge or plug-in type. Pad or line mounted designs are also available. Individual pigtail leads for each coil exit the solenoid on the mounting surface, although an electrical connector could be used on this same surface.
|
| | | |
| | | |
 | |
2-Way Proportional Metering Valve
WHAT IS IT? This is a Linear Proportional 2-way SERVOID® Metering Valve suitable for use with either liquidous or gaseous media. It contains a rare earth (Samarium Cobalt) permanent magnet which establishes a level of energy and readiness to react linearly with the application of an external electrical (current) signal.
The design features a dry coil and all "wetted" surfaces are wither stainless steel or nickel plated. Hardened steel poppets and seats are used to ensure durability, increase insensitivity to contamination and prevent calibration drift due to seat deformation typically associated with high cycle life applications using "soft" seats or poppets.
|
| | | |
| | | |
 | |
Air Metering Valve with Regulator
Aerospace qualified in defense applications
Single-stage metering for fast response
Compensates for variations in inlet & outlet pressure
Continuous-duty proportional Servoid™ driver
Each unit is tested under high, low and ambient temperatures
Configured specifically to the requirements of each system
Porting, manifold, and mounting flexibility
|
| | | |
| | | |
 | |
Diverter Valve
WHAT IS IT? This is a linear proportional, three-way blending or diverting SERVOID® Valve. The unit has three ports. In the diverter mode, the Valve will split a supply flow into two flows, the mass ratio of which will be in proportion to the current applied to the SERVOID® Controller. In the blender mode, the Valve will control the mixture ratio of two fluids, again, in direct response and in proportion to the signal to the Controller. Total flow from the valve is a constant at a given pressure drop across the unit.
|
| | | |
| | | |
 | |
Entlastungsventile
Operating pressures up to 13,000 PSIG and cracking pressures as low as 1 PSID define the range of offerings in this product group.
|
| | | |
| | | |
 | |
Four Coil Hydraulic
WHAT IS IT? This is a two position, three way, normally closed hydraulic Solenoid Valve rated at 3000 psi. It uses metal-to-metal poppet and seat design with a maximum leakage of 4.0 cc/min.
The Solenoid Assembly contains four redundant coils. The Valve will function normally with any two coils in operation and under all conditions. Radio frequency noise suppression is provided by four sets of diodes.
This design is configured as a manifold or plug-in type. Pad or line mounting schemes are also available. The electrical connectors engage their mates as the valve is installed in the manifold.
|
| | | |
| | | |
 | |
Fuel Metering Valve
WHAT IS IT? This is a SERVOID® Pilot-operated, two stage, linear proportional fuel metering valve with a built-in Large Scale Integrated (LSI) solid state microcircuit. The SERVIOD® Controller on this valve is a linear proportional DC Solenoid which is used to position a button over the pilot orifice in the follower piston. This system provides maximum stability, minimum transient effects due to vibration and extraordinary repeatability. The coil is dry, electrically isolated and epoxy encapsulated.
|
| | | |
| | | |
 | |
Fuel Metering Valve with Regulator
Aerospace qualified in defense applications
Single-stage metering for fast response
Compensates for varying inlet & outlet pressure
Continuous-duty proportional Servoid™ driver
Each unit is tested under high, low and ambient temperatures
Configured specifically to the requirements of each system
Porting, manifold, and mounting flexibility
|
| | | |
| | | |
 | |
Füll- und Entlüftungsventile
South Bend Controls also manufactures a variety of Fill and Drain, Fill and Vent, and Service Couplings for charging on-board vessels with pressurized gas or liquid ( up to 8,000 PSIG), then maintaining the pressure levels in a leak-tight condition. This is accomplished using match-tapered metal-to-metal seats, buttress-type acme threads and electron beam welding.
|
| | | |
| | | |
 | |
High Temperature Pneumatic Solenoid Valve
WHAT IS IT? This is a pilot operated, two stage, poppet type, high temperature, pneumatic, Solenoid Valve. It has all stainless steel or plated parts for long term corrosion resistance. It is capable of continuous duty in ambient temperatures reaching 300 degrees F while controlling the flow of gases at 530 degrees F. The Valve is the normally open type energized to close. It is equipped with a downstream pressure sensing port for position indicating instrumentation. The unit is maintainable in the field with overhaul kits available from stock. The Valve weighs less than 1.40 lb.. The Solenoid is thermally insulated from the Valve Body.
|
| | | |
| | | |
 | |
Latching
WHAT IS IT? This is a 2 coil magnetic latching spool type solenoid valve which employs a permanent magnet to hold the moving solenoid and valve elements in the extended or retracted position after removal of electrical power. The design offers a compact, reliable and long life alternative to mechanically latched flow control and motor operated devices.
In this configuration, the latching solenoid is connected to a 3-way, 2 position spool valve designed for liquous media. All wetted ferro-magnetic surfaces are protected from corrosive agents by electroless nickel plating. All other wetted surfaces are of high quality stainless steel or compatible elastomeric materials.
|
| | | |
| | | |
 | |
Linear Proportional Metering Valve Two Stage
WHAT IS IT? This is a SERVOID® Pilot-operated, two stage, linear proportional fuel metering valve. The SERVOID® Controller is a linear proportional DC Solenoid which is used to position a button over the pilot orifice in the follower position. The Controller has a dry coil. All wetted surfaces in the unit are either stainless steel or nickel plated. There are two sliding seals on the lower follower piston; none in the Controller.
|
| | | |
| | | |
 | |
Manifold Type - Fuel N/C
WHAT IS IT? This is a 2-Way, 2-Position, Normally Closed, Poppet Type Solenoid Valve. It is configured for Plug-in or Manifold installation. The Valve functions while completely immersed in pressurized fuel. All surfaces are Stainless Steel or plated for corrosion protection. Provisions for an optional Screen-Type Inlet Filter are standard. The Valve is pressure-aided and spring-loaded closed. The D.C. Solenoid is rated for continuous duty at 300 degrees F fluid and 460 degrees F ambient temperatures. Vibration tolerance is up to 20 G's at 0.5 inch peak to peak amplitude, any axis. Minimum dropout voltage is 3.7 VDC with no flow at 70 degrees F.
|
| | | |
| | | |
 | |
Manifold Type - Fuel N/C
WHAT IS IT? This is a very simple, 2-way, plug-in type Solenoid Valve. It was designed for economy but retains its aircraft quality. The Coil is a low voltage D.C. winding. The Armature contains an elastomeric "button" that engages a conical seat in the anodized aluminum Body. All ferro-magnetic materials are plated for corrosion protection. The design is very compact and weighs but 2¼ ounces. The Coil is sealed and the Body staked into the Solenoid Assembly. It is not economical to overhaul this unit. It's less expensive to replace it with a new one. Handling and shipping costs surpass its price. Yet it has the quality and reliability of Valves costing three and four times as much in like quantities.
|
| | | |
| | | |
 | |
Mixing and Metering Valve
WHAT IS IT? This Assembly is made up of two independent SERVOID® Valves which, when driven separately by synchronously, blend two gases to a desired ratio and deliver the blended gases at a desired flow rate and frequency from a common outlet. Maximum flow per Valve is 200 liters per minute @ 10 psid. Each side will shut off and control leakage to less than 50 cc/min. @ 10 psid. The operating pressure range is from 15 to 100 psig. The units are sufficiently accurate and consistent, cycle to cycle, valve to valve, that the drive current level is a very reliable indicator of mass or volumetric flow. The Valve's hysteresis is less than 4% F.S., repeatability less than 0.5% F.S., and response better than 40 Hertz. The curve on the reverse side is typical of either circuit. Resolution, particularly in the low flow range, is quite good. It has a turn-down ratio of 4000:1.
|
| | | |
| | | |
 | |
N/C Valve
WHAT IS IT? This is a 2-way, 2-position, D.C. Solenoid-operated, normally closed, hydraulic Valve. It has some distinction among other aircraft-quality Valves by its use of screw-type terminals in place of the more typical pin-type connectors. This design is compatible with a water-alcohol mixture but can be adapted to other fluids including all aviation fuels and diesel oil. The Valve Body is anodized aluminum. All other surfaces are stainless steel or plated ferro-magnetics. The Coil is vacuum impregnated with an epoxy resin. The unit weighs 14 ounces.
|
| | | |
| | | |
 | |
Pilot Operated, Anti-Ice Solenoid Valve
WHAT IS IT? This is a pilot operated, two stage, high temperature pneumatic Valve. It is designed for continuous duty controlling air at 700 degrees F in an ambient temperature of 250 degrees F. All "wetted" surfaces are made of Stainless Steel or protected by compatible plating. There are no overboard or internal seals. Leak paths are match-lapped to minimize by-pass flow.
|
| | | |
| | | |
 | |
Poppet Type - N/C
WHAT IS IT? This is a two-way, two-position, normally closed, poppet type Solenoid Valve. It has an anodized aluminum Body and all ferro-magnetic materials in the Solenoid Assembly are electroless nickel plated for corrosion protection. The Solenoid is threaded into the Body and secured with a locking type Set Screw. The Electrical Connector is a two-pin type per MS-3102A-12S-3P. The Valve has pressure ratings of 800 psig operating, 1000 psig proof and 1500 psig burst. It will withstand and operate under 10 G's Loading along any axis. The Solenoid operates normally with 24 to 30 VDC and draws a maximum of .75 amps at 75 degrees F ambient temperature.
|
| | | |
| | | |
 | |
Proportional Flow Control Valve
WHAT IS IT? This is a proportional flow control valve operated by a linear proportional SERVOID® driver. The driver is used to regulate a variable orifice which controls flow to the outlet port. By infinitely varying the orifice size, the flow can be regulated throughout the full range from minimal flow up to maximum rated flow.
The SERVOID® driver is the "intelligent" portion of this assembly, enabling the valve to provide infinite variability. The proven SERVOID® technology offers precise control and repeatability throughout its range, while simultaneously providing extraordinarily linear output. The valve is useful for a wide range of viscosities and fluids due to the knife edge variable orifice.
|
| | | |
| | | |
 | |
Regler
Operating pressures up to 13,000 PSIG and cracking pressures as low as 1 PSID define the range of offerings in this product group.
|
| | | |
| | | |
 | |
Rückschlagventile
With operating pressures up to 10,000 PSIG and cracking pressures from 1 to 12 PSID, South Bend Controls offers a wide range of check valves for OEM applications.
|
| | | |
| | | |
 | |
Schnellkupplungen
South Bend Controls manufactures a line of air-half and ground-half, ½" line size Disconnect Couplings for high pressure connections to rocket propellant systems.
|
| | | |
| | | |
 | |
Single Coil
WHAT IS IT? This is a two position, two way, normally closed solenoid valve rated at 325 psi. The valve poppet has an integral elastomeric pad which operates against the metal seat, with a maximum leakage of 5 cc/min. at 225 psi. The poppet is pressure assisted closed to aid in leakage reduction as pressure rises.
|
| | | |
| | | |
 | |
Three Coil Hydraulic
WHAT IS IT? This is a two position, three way, normally closed hydraulic solenoid valve rated at 3000 psi. It uses metal to metal poppet and seat design with a maximum leakage of 4.0 cc/min.
The solenoid assembly contains three redundant coils. The valve will function normally with any two coils in operation and under all conditions. Radio frequency noise suppression is provided by three sets of diodes.
This design is configured as a manifold face mount type. Plug-in or line mounting schemes are also available. The electrical connector engages its mate as the valve is installed on the manifold.
|
| | | |
| | | |
 | |
With Integral Check Valve
WHAT IS IT? This unit is a two position, 3 way, Poppet Type Solenoid Valve with an Integral Relief Valve. The Valve Body is Cast Aluminum but the steel Poppets and Seats are enclosed in a steel sleeve. All materials are compatible with Turbine Engine Fuel, Diesel Oil and Gasoline. The D.C. Solenoid is designed to take advantage of 14 to 30 VDC opening Voltage and to securely hold the Valve in place with only 8 VDC, a feature required to conserve power and to minimize heat. The Relief Valve provides both relieving and checking functions. It is isolated in the line from Lines to Port #3.
|
| | | |
| | | |
 | |
Zündungsaktivierte Ventile
If you need fast (less than 5 milliseconds), emergency flow of pneumatic gases, with zero leakage over a long storage life, squib-actuated valves are the answer. Our products have been used to inflate helicopter float pontoons and aircraft emergency passenger escape slides.
|
| | | |
| | | |
Ventile
Druckansicht
Impressum
Sitemap
Mediengetrennte
2 Position - N/O
