BMT - South Bend Controls - Proportionalventile

Produkte

Ventile

Mediengetrennte
Magnetventile

Mediengetrennte
Proportionalventile

Quetschventile

Miniatur
Magnetventile

Proportionalventile

Serie 390

Mediengetrennte
Pneumatikventile

Pneumatische
Schrägsitzventile

Luft- und Raumfahrt
Ventile

Ventiloptionen &
Zubehör

Pumpen

Manifolds & Chips

Sensoren

Schnellkupplungen, Fittinge & Schläuche

Entwicklungen

Mass-Flow-Controller

Labor Equipment

Microfluidic

Kataloge

South Bend Controls - Proportionalventile

Unsere OEM-Produkte werden nach den spezifischen Wünschen unserer Kunden angefertigt. Aus diesem Grund können wir Ihnen hier nur einen geringen Einblick in unsere Produktpalette bieten. Bitte nehmen Sie mit uns Kontakt auf, damit wir Ihnen auf Ihre Bedürfnisse angepasste Produkte anbieten können.

		PV-220 Gas Control: Propane, Methane & Natural Gas – including Sour Gas Flow rates up to 25 scfm [80 pph methane] with supply pressure of 65 psig [5.5 bar] and 19 psi [1.31 bar] differential (ESEOD of 0.20“) Design pressure: 75 psig – Contact factory for higher pressures Poppet design provides inlet and outlet pressure balancing Turn-down ratios in excess of 1,000:1 Metallic poppet & seat provide long reliable life with crisp lift-off Fast response time (20 msec typical) Robust design with computerized calibration insures reliability & repeatability for 100’s of millions of cycles Fully encapsulated coil – durability that comes with a reduced cost


		PV-221 Compatible with low pressure gas: Air, Oxygen, Heliox & Anesthesia Flow rates up to 200 slpm – 25 psig [2.7 bar] supply (ESEOD of 0.20“) Flow range tuned to the pressure and individual system requirements Poppet design provides inlet and outlet pressure balancing Turn-down ratios in excess of 1,000:1 Metallic poppet & seat provide long reliable life with crisp lift-off Fast response time (20 msec typical) Robust design with computerized calibration insures reliability & repeatability for 100’s of millions of cycles Fully encapsulated coil – durability that comes with a reduced cost


		PV-222 Inert gases and liquids compatible with stainless steel, aluminum, EPDM and nylon materials Metallic ball or special elastomeric seal available Fast response time - 20 msec typical Maximum flow rate: 0-150 slpm @ 40 psid (ESEOD 0.100” max.) Maximum input pressure: 60 psig (Contact factory for higher pressures) Turn-down ratios in excess of 1,000:1 Manifold mounted design allows maximum flexibility Robust design with computerized calibration insures reliability & repeatability for millions of cycles


		PV-231 PSV-HighFlow: Maximale Förderrate: 0-170 slpm bei 2,0 bar PSV-HighFlow: Maximaler Eingangsdruck: 2,4 bar PSV-LowPressure: Maximale Förderrate: 0-160 slpm bei 0,07 bar PSV-LowPressure: Maximaler Eingangsdruck: 0,17 bar Mit Aluminium and Silikon oder Nitril - Materialien beständig gegen Gase Sehr schnelle Reaktionszeit - 20 msec typisch Höchste Auflösung im Verhältnis von 1 000:1 Lebensdauer: mindestens 20 Millionen Zyklen


		PV-233 Flow Rates over 200 slpm Inlet Pressure Balanced over the range of 30-90 PSI [2.0-6.2 bar] as shown on the calibration curve below Designed specifically for Medical applications Inert gases compatible with aluminum and Silicone or Nitrile materials Special elastomeric seal Fast response time - 20 msec typical Turn-down ratios in excess of 1,000:1 Manifold mounted design allows maximum flexibility Robust design with computerized calibration insures reliability and repeatability for millions of cycles Cycle Life: 20 million cycles minimum


		Serie 390 The Inert Proportional Valve (IPV), a proportional solenoid operated diaphragm isolation valve, is designed for use with various gases, deionized water, dialysate, acids, bases, hydrogen peroxide, Renalin ® , sodium hypochlorite, bicarbonates and most other ultra-pure or corrosive fluids commonly used in the medical and clinical chemistry industries. This valve provides infinitely variable flow control in an economical package. Flow is proportional to the magnitude of the current input into this 24 VDC (nominal) valve driver.